Toolchain setup
Jump to navigation
Jump to search
Initial setup
Download the following:
- TunerPro RT
- WinLog or Winlog 14point7 - the latter has no nag screens, and the software is abandonware anyway at this point.
- Clone or download as "zip" the release folder on GitHub.
Setting up TunerPro RT
- After installing, edit the TunerPro shortcut and add the -multiinstance command line parameter, this will allow you to open multiple TunerPro instances at the same time.
- Copy the checksum plugin (M232csum.dll) to My Documents\TunerPro Files\Plugins. If you are using Windows 10 it can also be in your OneDrive folder. Best way to see is to start TunerPro once and exit.
- Load the .xdf file (XDF -> Select XDF)
- Load the acquisition file (Acquisition -> Load Definition File)
- Load the binary file (File -> Open Bin)
Setting up Winlog
COM Port splitter
If you want to use WinLog and the TunerPro acquisition at the same time, then you will need a COM port splitter.
A few links:
- XPort - the best free tool, but only works on 32 bit Windows up to Windows 7.
- FabulaTech - works, but expensive
- freevirtualserialports.com - not tested.