Requirements and modifications for running prjmod
Jump to navigation
Jump to search
MAP sensor
You need the MPXH6400A MAP sensor. It is possible to use any sensor, but unless you need to run more than 2.8 bar boost, save yourself the trouble, and run the MPXH6400A, as the provided files are calibrated by it.
The following image shows the sensors on top of each other, incl. the pin numbering:
The pinouts are not 1:1, here is a table as to how they should be connected:
| Board | MPXH6400A |
| 1 | 2 |
| 2 | 4 |
| 3 | 3 |