Difference between revisions of "Toolchain setup"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
* Load the binary file (File -> Open Bin) | * Load the binary file (File -> Open Bin) | ||
| − | == Setting up | + | == Setting up WinLog == |
| + | * Load the dashboard. File -> Open Dashboard | ||
| + | * Load the M2.3.2 driver. View -> Device Configuration | ||
| + | ** If the driver is not listed -> Have disk and select WinlogM232FastDiag.dll | ||
| + | ** A window will pop-up with settings - select the COM port you are using for your cable/splitter. The sensor settings are pre-set for the MPXH6400A | ||
| + | * Turn on the ignition and if you did everything correctly, you should see data streaming | ||
| + | * To log File -> Start new datalog | ||
| + | * To view/stop log File -> Open last datalog | ||
| + | * When using WinLogView - File -> Open Graph, and select m232_fast.wlg for a pre-configured view. | ||
== COM Port Splitter == | == COM Port Splitter == | ||
| Line 18: | Line 26: | ||
A few links: | A few links: | ||
* [http://www.curioustech.net/xport.html XPort] - the best free tool, but only works on 32 bit Windows up to Windows 7. | * [http://www.curioustech.net/xport.html XPort] - the best free tool, but only works on 32 bit Windows up to Windows 7. | ||
| − | * [https://www.fabulatech.com/serial-port-splitter.html FabulaTech] - works, but expensive | + | * [https://www.fabulatech.com/serial-port-splitter.html FabulaTech] - works, but expensive. |
* [https://freevirtualserialports.com/ freevirtualserialports.com] - not tested. | * [https://freevirtualserialports.com/ freevirtualserialports.com] - not tested. | ||
Revision as of 15:10, 1 November 2017
Initial setup
Download the following:
- TunerPro RT
- WinLog or Winlog 14point7. The latter has no nag screens, and the software is abandonware anyway at this point.
- Clone or download as "zip" the release folder on GitHub.
Setting up TunerPro RT
- After installing, edit the TunerPro shortcut and add the -multiinstance command line parameter, this will allow you to open multiple TunerPro instances at the same time.
- Copy the checksum plugin (M232csum.dll) to My Documents\TunerPro Files\Plugins. If you are using Windows 10 it can also be in your OneDrive folder. Best way to see is to start TunerPro once and exit.
- Load the .xdf file (XDF -> Select XDF)
- Load the acquisition file (Acquisition -> Load Definition File)
- Load the binary file (File -> Open Bin)
Setting up WinLog
- Load the dashboard. File -> Open Dashboard
- Load the M2.3.2 driver. View -> Device Configuration
- If the driver is not listed -> Have disk and select WinlogM232FastDiag.dll
- A window will pop-up with settings - select the COM port you are using for your cable/splitter. The sensor settings are pre-set for the MPXH6400A
- Turn on the ignition and if you did everything correctly, you should see data streaming
- To log File -> Start new datalog
- To view/stop log File -> Open last datalog
- When using WinLogView - File -> Open Graph, and select m232_fast.wlg for a pre-configured view.
COM Port Splitter
If you want to use WinLog and the TunerPro acquisition at the same time, then you will need a COM port splitter.
A few links:
- XPort - the best free tool, but only works on 32 bit Windows up to Windows 7.
- FabulaTech - works, but expensive.
- freevirtualserialports.com - not tested.